| 加工定制：否 | 品牌：BECKHOFF | 型号：KL5111 |
| 工作电压：24V | 输出频率：50kHz | 产品认证：CCC |
总经销BECKHOFF倍福编码器接口KL5111
| CX5020-0120 | Embedded PC | Basic CPU module CX5020, E-bus, Windows Embedded Standard, no TwinCAT |
| CX5020-0121 | Embedded PC | Basic CPU module CX5020, E-bus, Windows Embedded Standard, TwinCAT 2 PLC run-time |
| CX5020-0122 | Embedded PC | Basic CPU module CX5020, E-bus, Windows Embedded Standard, TwinCAT 2 PLC run-time, TwinCAT 2 NC run-time |
| CX5020-1100 | Embedded PC | Basic CPU module CX5020, K-bus, no operating system, no TwinCAT |
| CX5020-1110 | Embedded PC | Basic CPU module CX5020, K-bus, Windows CE, no TwinCAT |
| CX5020-1111 | Embedded PC | Basic CPU module CX5020, K-bus, Windows CE, TwinCAT 2 PLC run-time |
| CX5020-1112 | Embedded PC | Basic CPU module CX5020, K-bus, Windows CE, TwinCAT 2 PLC run-time, TwinCAT 2 NC run-time |
| CX5020-1120 | Embedded PC | Basic CPU module CX5020, K-bus, Windows Embedded Standard, no TwinCAT |
| CX5020-1121 | Embedded PC | Basic CPU module CX5020, K-bus, Windows Embedded Standard, TwinCAT 2 PLC run-time |
| CX5020-1122 | Embedded PC | Basic CPU module CX5020, K-bus, Windows Embedded Standard, TwinCAT 2 PLC run-time, TwinCAT 2 NC run-time |
| CX5020-N020 | Embedded PC | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5020-N030 | Embedded PC | RS232 interface, D-sub plug, 9-pin |
| CX5020-N031 | Embedded PC | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5020-N031-0001 | Embedded PC | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5020-N031-0002 | Embedded PC | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5020-N031-0003 | Embedded PC | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5020-N031-0004 | Embedded PC | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5020-B110 | Embedded PC | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5020-M310 | Embedded PC | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5020-B310 | Embedded PC | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5020-M510 | Embedded PC | CANopen master interface, D-sub plug, 9-pin |
| CX5020-B510 | Embedded PC | CANopen slave interface, D-sub plug, 9-pin |
| CX5020-M930 | Embedded PC | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5020-B930 | Embedded PC | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5020-B950 | Embedded PC | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
| CX1800-0401 | Embedded PC | Microsoft Windows Embedded Standard 7 P instead of Windows Embedded Standard |
| CX1900-0204 | Embedded PC | 1 GB DDR2 RAM for CX5020, instead of 512 MB DDR2 RAM; pre-assembled ex factory |
| CX1900-0105 | Embedded PC | Device modification for fulfillment of ATEX Certification II 3 G Ex nA II T4 for CX5010 and CX5020: This option includes the modification and repositioning of the device label as well as a pre-mounted wire bow to be used at the customer site as a retaining and securing mechanism for the USB and Ethernet cables in order to prevent electrical sparks. The modification is a mandatory prerequisite for usage of CX5010 or CX5020 in hazardous areas as covered by the before mentioned certificate for ATEX Zone 2. Please also read the device documentation carefully. |
| CX1900-0102 | Embedded PC | Spare battery suitable for CX10x0, CX50x0, CX51x0, CX90x0, CX20x0 – lithium button cell type CR2032, 3V/225 mAh – follow polarity when installing |
| CX1020 | Embedded PC | Modular DIN rail Industrial PC – 1 GHz Intel? Celeron? M ULV processor – flash memory: 64 MB Compact Flash card – internal main memory: 256 MB DDR RAM (expandable to 512 MB, 1 GB) – interfaces: 2 x RJ45 (internal switch), 10/100 Mbit/s – diagnostics LED: 1 x power, 2 x LAN link/activity, 1 x TC, 1 x flash access – expansion slot: 1 x Compact Flash type I+II insert with eject mechanism – clock: internal battery-backed clock for time and date (battery exchangeable) – operating system: Microsoft Windows CE or Microsoft Windows Embedded Standard – control software: TwinCAT PLC run-time, NC PTP run-time, NC I run-time – max. power loss: 11 W (including CX1020-N0xx system interfaces) – protection class IP 20 – operating/storage temperature 0 °C ... +50 °C/-25 °C ... +85 °C – weight approx. 550 g – dimensions (W x H x D) 96 mm x 112 mm x 99 mm – &＃39;C&＃39; = placeholder for the system interface connector options: 0 = preequipped with CX1020-N000 = 2 x Ethernet RJ45 connector (internal switch) 1 = preequipped with CX1020-N000 = 2 x Ethernet RJ45 connector (internal switch) + CX1020-N010 = DVI connector and 2 x USB port connectors – &＃39;S&＃39; = placeholder for the operating system options: 0 = no operating system installed 1 = preequipped with Microsoft Windows CE 6 2 = preequipped with Microsoft Windows Embedded Standard 2009(requires a Compact Flash card ≥ 2 GB) – &＃39;T&＃39; = placeholder for the TwinCAT software level options: 0 = no TwinCAT software installed 1 = preequipped with TwinCAT 2 PLC licence 2 = preequipped with TwinCAT 2 NC PTP licence 3 = preequipped with TwinCAT 2 NC I licence Please refer to the following table listing for the order numbers of the various valid combinations. |
上海勇控自动化设备有限公司
主营：BECKHOFF倍福，PILZ皮尔兹，库存充足，报价快
联系人：文工
电话：15801922503 021-60504692
微信：zhiyong542701
